Brand | Transcom |
Service Type | Field Measurements |
Weight | 2.5kg |
Dimensions | 120X100X220mm |
Maximum Power | 24W |
Temperature Range | -40 Degree C to 85 Degree C |
TSE Scanner is an Integrated Platform Based on Multi-Standard Scanner and Analysis Software. It is used for automatically sweeping and scanning signals at high speed, such as FDD/TD-LTE signals, NB-IoT, eMTC and 5G (CW test). The output results include cell coverage parameters, broadcast channel system messages and spectrum displayed intuitively by various means. The instrument can be widely applied in network survey, planning, building, optimization, etc.
Products Details:-- Support full band tests within 700MHz to 2.7GHz.
- Support CW test for 5G (support band customization in 700MHz – 5000MHz)
- Support simultaneous tests of multi-system and multi- frequency TDD-LTE, FDD-LTE, NB-IoT, eMTC, 5G (CW test) signals.
- Measurement mode: P-SCH/S-SCH, RS
- Data mode: RSSI, RP, RQ, CINR, Timing, Cell ID, Cyclic Prefix, CF0, Delay Spread
- Channel bandwidth: 1.4/3/5/10/15/20MHz
- Measurement rate: ≤500ms (per frequency point)
- Co-frequency cell detection capability: >15dB
- Dynamic range (CINR) @20MHz: P-SCH/S-SCH: -20 to +30dB
- Dynamic Range (CINR) @20MHz: RS : -20 to +30dB
- Detection sensitivity (RSRP) @20MHz :-130dBm
Features:-
- 700MHz to 2.7GHz spectrum and multi-system demodulation
- Support test NB-IoT/eMTC simultaneously
- Support 5G CW test (3.3GHz to 3.6GHz, 4.8GHz to 5GHz)
- High-speed measurement for various scenes
- Powerful common frequency capabilities
- Efficient SIB decoding
- Automatic testing
- Uplink time slot interference test
Application:-
- Propagation model tuning test
- Indoor distribution system emulation test
- Frequency check
- Network DT optimization test
- Operators network coverage comparison analyzing
- Interference check